Canon Pixma Tr4520 Fax Setup

To Perform Canon Pixma Tr4520 Fax Setup, read the quick, simple steps given below, and proceed with the same.

  1. Before you begin the Fax setup, check if your Canon Pixma TR4520 printer and the system are connected to the same network.
  2. Make sure that you have installed the Canon Pixma TR4520 printer driver on your system.
  1. (1) Connect Telephone Line. 
  2. (2) Set Telephone Line Type.
  3. (3) Set receive mode. net net
  4. (4) Set sender information.
Canon Pixma Tr4520 Fax Setup

Connect Telephone Line net

  1. Switch off your Canon Pixma TR4520 printer if it is turned ON.
  2. Connect your Canon Pixma TR4520 printer to the telephone wall jack using a telephone line cable.
  3. Now, start setting the Telephone Line Type.

Setting Telephone Line Type

  1. Press the Power button on your Canon Pixma TR4520 printer’s control panel to turn it ON.
  2. Launch the Setup screen by pressing the Setup button.
  3. Now, select Fax settings FAX user settings Telephone line type.
  4. Make sure to press the OK button whenever required.
  5. Now, a list of telephone line types will be displayed on the screen.
  6. Select the Telephone Line Type you are using and press the OK button.
  7. Now the fax setup is almost done. Complete the entire Fax setup by setting the Receive mode & Sender Information on your Canon Pixma TR4520 printer.

Setting the Receive Mode

  1. On your Canon Pixma TR4520 printer’s control panel, press the FAX button.
  2. Select Menu/ Wireless connect Receive mode set.
  3. From the list of receive mode suggestions, select the one you want and press the OK button.
  4. To set some advanced receive mode settings, select the Yes option on the confirmation message screen.
  5. If not, tap the No option.

Setting the Sender Information

  1. Make sure that your Canon Pixma TR4520 printer is turned ON.
  2. Navigate to the Setup screen.
  3. Choose Fax Settings FAX user settings.
  4. Check if the Unit TEL no.registr option is selected.
  5. If not, select it. Enter the receiving telephone or fax number in the given field using the Numeric buttons.
  6. To save or confirm the changed settings, press the OK button.
  7. Now, select the Unit TEL name registr option.
  8. Enter the receiver name and press the OK button.
  9. After entering all the sender information, press the Fax button on the printer’s control panel.
  10. Now, try to send the Fax message.
  11. To Perform Canon Pixma Tr4520 Fax Setup, Contact our technical support member by clicking the Call button available here.
Call Us